GliderCG is a precision equipment that has been carefully manufactured, assembled and
calibrated before it reaches your hands.
All mechanical parts have been manufactured in PLA by 3d printing.
The calibration coecients have been calculated using a calibrated weight with a weight of:
Front Calibration Coecient:
Rear Calibration Coecient:
The distances between the dierent points of support have been veried with a digital caliper
to the hundredth of a millimeter.
Dimensions Height x Width x Depth: 170x150x235mm.
Power supply: 9v DC, 6LR61.
Approximate consumption: 60mAh.
Max. Recommended weight 6Kg.
Maximum fuselage size allowed: 86mm width x 87mm height
Characteristics
Eng
6
GliderCG
To Next Page
Loading...