Need help?Do you have a question about the Global Automatics Premier-Slide 100 and is the answer not in the manual?
Power| mains voltage | 180 - 250 V AC |
|---|---|
| aux power supply | 24 V DC 2 A |
Operating Environment| hold open time | 0 - 60 sec |
|---|---|
| opening speed max | 600 mm/sec |
| closing speed max | 600 mm/sec |
| ambient temperature | -20 to +55 |
Weight and Dimensions| max single door width | 2000 mm |
|---|---|
| max double door width | 3000 mm |
| max door height | 3000 mm |
| max single door weight | 120 kg |
| max double door weight | 180 kg |
Details compliance with relevant safety standards, minimum BS: 7036:1996, and other regulations for door system installation.
Outlines the need for safe disposal of hazardous materials contained within the door system's electronics and batteries.
Specifies that the operator is designed for dry use within weather-tight buildings.
Describes various operating modes available for end-users, such as Automatic, Exit Only, and Pharmacy Mode.
Details the steps to adjust the door height using M6 bolts and the M5 adjustment bolt for optimal movement.
Details how to adjust the belt tension using the idler pulley assembly and adjuster bolt for optimal performance.
Describes the system using two 12v batteries, their monitoring, and charging capabilities for mains failure.
Instructions for mounting the access switch using screws, including drilling for concealed wiring.
Details cutting and drilling requirements for flush installation of the access switch in frame sections or walls.
Explains the process for flush mounting the access switch within the operator's canopy.
Explains the Interlock function for security lobby systems, requiring sister doors to be closed and locked.
Describes the self-diagnostic system's error codes, distinguishing between customer-fixable and engineer-required issues.
Describes accessing door information, error logs, and setting time/date within the installer setup.
Explains accessing settings for opening/closing speeds, auto-reverse, hold times, and opening direction.
Covers setting asset descriptions and service telephone numbers within the installer setup.
Explains how to check safety sensor status (active/inactive, monitored/not monitored) via the installer menu.
Details how to view PSU voltage, battery voltage, and recent door activity logs.
Explains speed groups for single/double doors, covering high speed, braking, and low speed settings.
Describes adjusting the time the door remains open after activation before starting to close.
Explains the function to enable or disable the motor lock when the door reaches its closed position.
Sets the maximum speed for the door's opening cycle, including braking force and distance.
Adjusts the force threshold that triggers the door to reverse direction upon encountering an obstacle.
Guides on enabling the interlock function for security lobby setups, linking door operations.
Explains how to adjust high speed, low speed, and final speeds for the door's opening cycle.
Details how to adjust high speed, low speed, and final speeds for the door's closing cycle.
Sets the partial opening percentage specifically for the Pharmacy Mode operation.
Explains how the system monitors battery status to ensure power for failure procedures, as per BS7036:1996.
Adjusts the hold-open duration for activations specifically from the key input.
Configures the fire alarm input as Normally Closed (N.C) or Normally Open (N.O) based on requirements.
Guides on enabling the interlock function and setting the auxiliary lock type (fail safe/secure).
Displays system information including mains voltage, battery status, and sensor activations.
Accesses a list of the last 20 recorded faults with timestamps and provides options to clear the log.
Allows exiting the technician's mode and returning to the customer menu.
Provides guidance on cleaning and maintaining the powder-coated finish of the door system.
Details the manufacturer's warranty terms, coverage, and limitations for the door operator components.
To Next Page