Need help?Do you have a question about the Global Fire ORION 4 and is the answer not in the manual?
General| Brand | Global Fire |
|---|---|
| Model | ORION 4 |
| Category | Fire Alarms |
| Language | English |
Provides critical safety instructions for the installation and maintenance of the fire detection equipment.
Explains the wiring configuration for detection zones, including end-of-line monitoring.
Specifies the supervised 24V DC auxiliary power output, including protection features.
Describes the relay contacts for fire and fault indications, their ratings, and activation conditions.
Provides instructions for connecting zone, sounder, and power cables to the control panel.
Details the installation of standby batteries, including wiring in series and safety precautions.
Outlines the steps required before commissioning, such as checking connections and fitting EOL devices.
Details the sequence of checks and tests to perform during the commissioning process.
Procedure for testing smoke detectors using test smoke and verifying response.
Procedure for testing heat detectors using a heat test unit and verifying response.
Lists functions accessible to engineers, such as programming coincidence and delay timers.
Describes the general fault indication and specific zone faults indicating circuit issues.
Details supply fault indications, including main supply voltage and battery issues.
Indicates a fault at the main processor level requiring panel repair or replacement.
Details the mains supply voltage, internal power supply, and total output current.
Lists specifications for detection circuits, including cable resistance, capacitance, and detector limits.
To Next Page