Need help?Do you have a question about the Global WF 955 AUT and is the answer not in the manual?
General| Brand | Global |
|---|---|
| Model | WF 955 AUT |
| Category | Sewing Machine |
| Language | English |
Main structural component of the sewing machine's arm and base.
Plate with a hole for the needle to pass through.
Parts that apply adjustable tension to the upper thread.
The main rotating shaft located within the machine's arm.
Pulley driven by the motor, used for manual operation and power transmission.
Lever that lifts and lowers the upper thread during the stitch cycle.
Crank mechanism that drives the needle bar vertically.
Assembly holding the bobbin and interlocking with the needle thread.
The hook mechanism that forms the lower stitch by looping the needle thread.
Toothed component that moves the fabric forward during sewing.
Bar that holds and moves the needle up and down.
Solonoid that activates the automatic thread trimming function.
Solonoid that controls the activation of the backtacking function.
Technical parameters and performance characteristics of the sewing machine.
Adjustments for the automatic thread cutting system.
To Next Page
