EasyManuals Logo

Globe SP62P-4 User Manual

Globe SP62P-4
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
Page17
Problem Possible Causes Action Required
Mixerwillnotrun. Bowlguardnotinclosedposition. Rotateguardtotherightuntilfullyclosed.
Bowlnotraised. Raisebowltohighestposition.
Timerisnotengaged. Turntimeratleastveminutespast“0”,thento
desiredtimeorsettimetothegreen“on”position.
Powernotconnectedproperly. Checkallpowerconnections.Plugintoalivesocket.
(Do not use extension cord!) Testsocketwith
anotheritem.
Buildingcircuitbreakerisoff. Checkbreakerbox.
Internaloverloadtripped. SP25&smallermodels:Pressstopbutton,then
pressresetbutton.Largermodels:Waittwo
minutes.Pressstopbuttonthenpressstartbutton.
(If overload continues to trip, reduce batch size
and/or adjust recipe!)
Gearnotengaged. Switchgearfullyintoposition.(Mixer will not operate
if the speed control lever is positioned in between
speeds)
Mixerstopsduring Internaloverloadtripped. SP25&smallermodels:Pressstopbuttonthen
mixing. pressresetbutton.Largermodels:Waittwo
minutes.Pressstopbuttonthenpressstartbutton.
(If overload continues to trip, reduce batch size
and/or adjust recipe!)
Damagedorbrokentransmissionbelt. SP25&largermodels:Contactatechnicianto
replacebelt.
Speedswerechangedduringmixing, Returnspeedcontrollevertoaspeedmodel
SP80PLonly. positionandrestartthemixer.
Mixerisnoisy. Mixerisnotinstalledonlevelsurface. Adjustsurfaceorrelocatemixer.Makesurerubber
feetareinstalled.
Bowlnotseatedcorrectlyorclamps Ensurebowlisseatedintobowlcradlecorrectlyand
notinplace. bowlclampsarelockedintoplace.

Agitatornotttedproperly. Removeandattachagitatorintopositionproperly.
Overloadingbowl. Reducebatchsize.(See Capacity Chart, page 16)
Damagedorwornbelt. Replacebelt.
Planetaryringgearneeds Contactatechniciantoinspectforsourceofnoise.
moregrease.Reapplyhigh-pressuregrease.
Safetyguardseized Clean&lubricateslidesheath. Technicianmustdropdownplanetaryassemblyto
(willnotmovefreely). accessmat&sheath.Contacttechnician.
Agitatorswon’tgo Lackoflubricationand/orcleaning Wipeplanetaryshaftwithacleandampclothand
ontotheplanetary oftheplanetaryshaft. lubricatetheshaftwithmineraloilorfoodquality
shafteasily. grease.
Troubleshooting

Other manuals for Globe SP62P-4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Globe SP62P-4 and is the answer not in the manual?

Globe SP62P-4 Specifications

General IconGeneral
BrandGlobe
ModelSP62P-4
CategoryMixer
LanguageEnglish

Related product manuals