4
Preparation
• Remove all parts and hardware from the box and place them on a clean, soft and dry
surface.
This product contains a GLAS plate! Always exercise extreme caution
when handling. Otherwise, injury or damage to property may occur.
• Compare the content to the BOM to make sure nothing is missing.
• Dispose of all packaging materials properly.
• Please recycle whenever possible.
TOOLS FOR ASSEMBLY
• Phillips screwdriver, electric drill; 1/4" wood drill, hammer. Water scale (not included)
PARTS AND HARDWARE
C - Dowels (3)
D - Screws (18)
RC Remote Control (1)
E-rail for wall mounting (1)
G - Accessories for
stand (2)
I - Stand module
To Next Page
Loading...
