Glow-worm Betacom 24a - Timer; Setting the Time

0020105023_00-10/10-Glow-worm
- 11 -
HOWTOUSEYOURAPPLIANCE
8.5 TIMER
8.6 Setting the time
Refertodiagrambelow.
Rotatetheminutehand(2)clockwiseon
the24hourclockdial(1)untilthetriangle
(6)linesupwiththecurrenttime.
8.6.1 Setting the programme “ON
and OFF” times.
Refertodiagrambelow.
• SelecttheONtimesbypushingthe
blacktappetstotheoutside(4).
• SelecttheOFFtimesbypushingthe
blacktappetstotheinside(3).
• Positiontheselectorswitch(5)tothe
middleposition
.
• Theheatingwillnowoperateyour
chosenprogramme.
8.6.2 To override the timer.
• Movetheselectorswitch(5)totheI
positionandtheheatingwilloperate
continuously.
• Movetheselectorswitch(5)tothe0
positiontoswitchtheheatingOFF.
1
2
3
4
5
6
Key
1 24 hour clock dial
2 Minute hand
3 Off tappets to the inside
4 On tappets to the outside
5 Selector switch
6 Triangle