Supplied By www.heating spares.co Tel. 0161 620 6677
19
220692C
19
SECTION
5
Flue Installation
step
step
11
12
step
13
3mm DRILL SIZE
2896
AIR DUCT/TERMINAL
ASSEMBLY
FLUE
DUCT
SEALANT
AIR DUCT/TERMINAL
AND FLUE DUCT
ASSEMBLY
FLUE MANIFOLD
5mm
Air Duct/Terminal and
Flue Duct Assembly
Locate the flue duct into the air duct/
terminal.
Place the sealant from the loose items
pack onto the flue manifold.
Fully locate the flue manifold into the
air duct/terminal and flue duct
assembly as shown, ensuring correct
alignment of the “TOP”s.
Drill two 3mm diameter holes through
the air duct/terminal and flue manifold.
Secure the air duct/terminal to the flue
manifold with the two self tapping screws
supplied in the loose items pack.
It should now not be possible to remove
the manifold.
To Next Page
Loading...
