3
GlowLightControl.com
Instructions
Here’s How To Assemble
• First, remove the
contents of the carry-
case: Aluminum Frame,
Frame Handle, and
Fabrics
• Take the collapsible
tubular aluminum frame
and unfold it, snapping
each joint open, to form
the 39x62” rectangle.
• Two positional clamps
with sockets for the
frame handle are
afxed to the long side
of the frame. Loosen the
winged knob on each
and slide each clamp
along the long pipe of
the Sun Scrim frame
about midway.
• Loosely tighten the
winged knob clamp in place to the frame.
Make sure that the side of the clamps with the
socket holes are facing out.
• Take the aluminum frame handle and insert it
into the opening of the rst clamp. Tighten it
into place with the wing knob.
• Take the other end of the frame handle and
insert it in the second clamp opening and
tighten both sides into place.
• Take the diffusion material
of your choice, and attach
it, by wrapping it on to
frame using the Velcro
strips. Fasten the panel
gradually, to allow for the
even placement along the
frame, without causing
stress to the assembly.
• The assembly is complete
for placement and posi-
tioning.
• When nished using the
scrim, simply remove the
fabric from the frame, press
the release lock buttons
on the frame, and fold the
structure on each hinge to
prepare it for safe storage.
Features
• Alters and modies strong light sources into soft,
diffused illumination
• Serves as a great backdrop frame or support
for material
• Professional interchangeable screens for still
and video production
• Extremely stable tubular frame can be quickly
assembled
• Lightweight and tough extruded aluminum frame
• Can be used outdoors even in windy conditions
• Fabrics and fasteners of high quality materials
• Highly portable. Take this kit anywhere in its
own fabric case
To Next Page
Loading...