Need help?Do you have a question about the GLX GLS-47 and is the answer not in the manual?
General| Brand | GLX |
|---|---|
| Model | GLS-47 |
| Category | Lighting Equipment |
| Language | English |
Read and keep instructions. Avoid water, use dry cloth, install correctly, ensure ventilation, protect cord and unplug when unused.
Attach LED BAR to a 35mm stand, fasten screw for balance. Follow overhead rigging safety instructions.
Connect per IEC standards with a 30mA RCD. Do not connect lighting effects to dimming packs.
Select between Sound Controlled (*SND) or DMX Controlled (*512) modes via MENU, UP, DOWN buttons.
Control spots individually. The GLS-47 uses 15 DMX channels for control.
Use a stereo shielded cable with 3-pin XLR connectors to link controller or fixtures.
Dual focus offers 20° center and 40° spread beams. TCL provides seamless color mixing.
Synchronize multiple devices. Connect OUT to IN, set master to SOUND, slaves to same DMX address.
Connect via 5-pin cable. Control modes (sound/DMX) and functions via pedals.
Ensure connections are tight, no deformations, no cable damage. Clean with soft, moist cloth.
Replace fuse only with the same type and rating. Open holder, remove old fuse, install new, remount holder.
Includes beam angle, sound control, max temperature, minimum distances, fuse, dimensions, and weight.
Details functions for internal programs, master dimmer, strobe, and color control for each spot.
To Next Page