Do you have a question about the GM ULTIUM POWER BAR and is the answer not in the manual?
Steps to start the vehicle for charging, requiring the RKE transmitter and brake pedal.
Steps to stop the vehicle by applying brakes, pressing Park, and then pressing Power.
Type 1 connector flashing green; Power is ON, calibration OK.
Power is ON, no LED's active; Power ON, circuit breaker tripped.
Manually resettable error, calibration failed, or non-resettable error, solid red; Overheating error.
| Charging Capability | Up to 19.2 kW |
|---|---|
| Maximum Output | 19.2 kW |
| Amperage | 80A |
| Connector Type | SAE J1772 |
| Input Voltage | 240V |
| Output Voltage | 240V |
Loading...