How
to Operate Your
ETR@
AM-FM
Stereo
Audio
System
This part tells you how your
ETR@
AM-FM
stereo audio system works:
The
Upper
Knob
The upper knob does these three things:
It controls the volume. The
VOL
knob increases volume when rotated
to the right.
It lets you
see
what station you have. (When the radio is on, push the
It tells you the time. (When the ignition is off, push the
RECALL
knob
knob to display the station.)
to display the time.)
The control behind the upper knob moves the sound between your left and
right speakers.
The
Lower
Knob
Turn the lower knob to choose radio stations. Push it to get AM or FM.
The control behind the lower knob moves the sound between your front and
rear speakers.
Tone Levers
These two levers control the tone of your radio.
BASS
-Slide this lever up to increase the bass response.
TREBLE
-Slide this lever
up
to increase the treble response.
Adjust this lever to give a pleasing sound.
If
a station is weak and noisy,
move
TREBLE
down to reduce the noise.
PWR (Power)
The
PWR
button turns your system on and off.
3-10