New Vehicle “Break-In”
1
NOTICE:
Your modern vehicle doesn’t need an elaborate “break-in.” But
it
will perform better in the long run
if
you follow these
guidelines:
Keep your speed at
55
mph
(88
kmh) or less for the
first
500
miles
(804
km).
Don’t drive
at
any one speed
-
fast or slow
-
for the first
500
miles
(804
km). Don’t make full-throttle starts.
Avoid making hard stops for the first
200
miles
(322
km) or
so.
During this time your new brake linings aren’t yet broken
in. Hard stops with new linings can mean premature wear and
earlier replacement. Follow this “breaking-in” guideline
every time you get new brake linings.
Qnition Switch
Use your ignition key to start your vehicle. The ignition key lets you turn
the ignition switch
to
five different positions.
2
5
w
1.
OFF
2.
RUN
3.
START
4.
ACC
5.
LOCK
-
ACC (Accessory): ACC lets you use things like the radio and the
windshield wipers when the engine
is
off.
To
get into ACC, push in the key
and turn it toward you. Your steering wheel will remain locked, just as it
was before you inserted the key.
2-
15
To Next Page
Loading...
