Wait until the
4
LO
indicator light goes solid amber before shifting your
transmission into gear. This will get
you
into
4
LO,
but you should take
your vehicle in for service
so
normal operation can be restored.
To
shift from
4
LO
to
4
HI:
Your vehicle must be stopped or moving less
than
3
mph
(4.8
km/h) with the transmission in
“N’
(Neutral) and the clutch
pedal depressed. The preferred method for shifting out of
4
LO
is to have
your vehicle slowly moving
1
to
2
mph
(1.6
to
3.2
km/h).
Press and release
the
4
HI
switch. You must wait for the
4
HI
indicator light to stop flashing
and go solid amber before shifting your transmission into gear or releasing
the clutch pedal.
If the
4
HI
switch is pressed when your vehicle is in gear and/or moving,
the
4
HI
indicator light will flash for
30
seconds but not complete the shift
unless the vehicle is below
3
mph
(4.8
km/h)
and the transmission is in
“N’
(Neutral) or the clutch pedal depressed.
On automatic transmission equipped vehicles:
If
your transfer case does not
shift into
4
HI,
your transmission indicator switch may require adjustment.
With your transmission in
“N”
(Neutral), press and release the
4
HI
switch.
While the
4
HI
indicator light is flashing, shift your transmission into
P
(Park). Wait until the
4
HI
indicator light goes solid green before shifting
your transmission into gear. This will get you into
4
HI,
but you should
take your vehicle in for service
so
normal operation can be restored.
To
shift from
4
LO
to two-wheel drive
(2
WHEEL):
You must shift from
4
LO
to
4
HI
before shifting back into two-wheel drive.
Windows
To open your manual
windows,
turn
the
hand crank on each
door to raise or lower
your side door
windows.
2-35