When you first turn on your vehicle’s air conditioning, open the windows to
clear the vehicle of
hot
air. Using the
MAX
button can
also
help. See
“MAX
Button”
in
this section for more information.
Function Display
Your system has a lighted display showing each system when
it
is operating.
During normal operation, all the lights won’t comc
on
at thc same
time.
Only the ones displaying the current settings
will
light.
Temperature Selector Bar
The bar under your system display lets
you
select the temperature
of
the
air
flowing
into
the passenger area of your vehicle. Press
COLD
for cooler air
and press
HOT
for warmer air. Release the bar when the system reaches the
temperature you want. The temperature is shown on the display by the
arrow moving between
C
and
H.
Air Controls
(BLEND)
The two buttons to
the
right of
the
system display control the air flow.
You
can blend the air flow to suit your needs. The amount
of
blending
is
shown
on the display by an arrow moving between the figure’s feet
(floor
air flow)
and head (vent air flow).
Left Button
Vent
(Top)
:
Press
the
top
of
this button and the air flow
will
come through
the
instrument panel vents.
Heater (Bottom)
:
Press the bottom
of
this button and the air flow
will
come through the floor outlet.
3-6
To Next Page
Loading...
