EasyManua.ls Logo

GMC 1994 Yukon - Rear Air Conditioning and Heating Systems (Wagon Models)

GMC 1994 Yukon
386 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fan
Control Button
This button is
in
the
upper right corner
of
your system control panel. The
fan has four settings
-
low, medium
low,
medium high and high. Press the
top of the button
(+)
to
increase the air
flow.
Press the bottom of the button
(-)
to
decrease the air flow. The setting you select
is
shown on your display
as
LOW, MED LOW, MED
HI
or
HI.
OFF Button
Press this button
to
turn
the
air conditioning/heating system
off.
Pressing
OFF
will erase the present mode
of
operation from the system’s memory.
Outside air
will
still come
out
of the heater outlet whenever the vehicle
is
moving forward.
If
the
OFF
button was pressed,
you
must press
A/C,
MAX,
or one of the
BLEND
buttons for the system to come back on.
Rear
Air Conditioning and Heating Systems (Wagon
Models)
If your vehicle has either or both
of
these systems, you can increase and
decrease the air flow at
the
rear vents. Depending on the system you have
and the setting selected,
you
can send cooled or heated air to the rear of the
vehicle.
Rear Air Conditioning (Without Rear Heater)
If
your vehicle has rear air conditioning (without rear heater), the controls
are located above the front and second seats. The front and rear overhead
controls
let
you increase and decrease the air flow
at
the rear vents.
Front Control
Rear Control
3-8

Table of Contents

Related product manuals