Power Seat
If your vehicle has a
power seat
on
the
driver’s side, you can
adjust
it
with this
switch at the front
of
the seat.
You can use the center switch knob to
move
the seat where you want
it.
To
raise
the
seat, move the center switch knob up.
To
lower the seat, move the
center switch knob down.
To
move
the
seat forward, move the center switch
knob toward
the
inside
of
the vehicle.
To
move
the
seat rearward, move the
center knob toward
the
outside
of
the
vehicle.
You can also raise and lower
the
front and rear
of
the seat.
To
raise
the
front
of
the
seat, move the inner switch lever up.
To
lower the front
of
the seat
move the inner switch lever down.
To
raise
the
rear
of
the seat, move
the
outer switch lever
up.
To
lower the rear
of
the seat, move the outer switch
lever down.
Reclining Front Seatback (Bucket
or
Split Bench Seat)
To
adjust the seatback,
lift
the front
of
this
lever.
Release
the
lever to lock
the
seatback where you want
it.
Pull up on the
front
of
the
lever and the seatback
will
go to an upright position.
Don’t have a seatback reclined
if
your
vehicle is moving.
1-3
To Next Page
Loading...
