Lap-Shoulder
Belt
The positions next
to
the windows have lap-shoulder belts. Here’s how to
wear one properly.
1.
Pick up the latch plate and pull the belt across you. Don’t let
it
get
twisted.
2.
Push
the
latch plate into the buckle until it clicks. If the belt stops
before
it
reaches
the
buckle, tilt
the
latch plate and keep pulling until
you
can buckle
it.
Pull up
on
the latch plate to make sure it is secure.
If the belt
is
not long enough, see “Safety Belt Extender” at the end of
this section.
Make sure the release button
on
the buckle
is
positioned
so
you
would
be able
to
unbuckle the safety belt quickly if you ever had to.
To
make the lap part tight, pull down
on
the buckle end of
the
belt as
you pull up on
the
shoulder part.
1-29
To Next Page
Loading...
