TO.
remove
and
store the'comfort guides, just
perform
these
steps.in
reverse
order.
Squeeze
the belt
edges
together's0 that
yau
can
take
them out
from
the.
guides.
Pull
the guide upward to expose its storage clip,
and
then slide the guide onto the clip. Rotate, the &de and
clip inward and in between the seatback
and
the interior
body, leaving
only
the loop
of
elastic cord exposed.
'Center Rear Passenger Position
@-Door Models)
Lap
Belt
When you sit in the center rear seating position, you
have a lap safety belt which has a retractor.
1.
Pick
up
the latch plate and pull the belt across you.
Don't let it get twisted.
2.
Push the latch plate into the buckle until
it
clicks.
3.
Feed the lap belt into the retractor to tighten it.
Pull up
on
the latch plate to make sure it is secure.,
1-32
To Next Page
Loading...
