ng Cruise
Co
A rol
Resuming
a
Set
Speed
If
you leave your cruise control switch on when
you’re not using cruise, you might hit a button
and
go
into cruise when you don’t want to. You
could be startled and even lose control. Keep the
cruise control switch
OFF
until you want to use it.
Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course, shuts
off
the cruise control. But you don’t need to reset
it.
I.
Move the cruise control switch
to
ON.
2.
Get up to the speed
you
want.
Once you’re going about
25
mph
(40
km/h) or more,
you can move the cruise
control switch from
ON
to
R/A
for about a
1/2
second.
3.
Press
in
the
SET
button
at
the
end
of
the
lever
and release
it.
You’ll go right back up to your chosen speed and
stay there.
Remember,
if
you hold
the
switch
at
R/A
longer
than
a
1/2
second, the vehicle
will
keep going faster
until
you release
the
switch or apply the brake. You could be
startled and even lose control.
So
unless you want to
go
faster, don’t hold the switch at
R/A.
4.
Take your foot
off
the accelerator pedal.
To Next Page
Loading...
