Erasing
Speed
Memory
When you turn off the cruise control or the ignition,
your cruise control set speed memory is erased.
Lamps
Your parking/headlamp knob is on the driver’s side of
your instrument panel.
Rotate the knob clockwise to the parking lamp symbol
to turn on the following:
Parking Lamps,
Sidemarker Lamps,
Clearance Lamps
(if
you have
them),
Taillamps,
License Plate Lamps and
Instrument Panel Lights.
Rotate
the
knob clockwise again to the master lighting
symbol to turn on all the lamps listed as well as
the headlamps.
Rotate the knob counterclockwise to
OFF
to
turn
off
your lamps.
Rotate the thumb wheel next to the knob
up
to
adjust
instrument panel lights. Rotate
the
thumb wheel up to
the first notch to return the radio display and gearshift
indicator
LED
display to full intensity when the
headlamps or parking lamps are on.
To
turn
on
the dome
lamps (with the vehicle doors closed) rotate the thumb
wheel up to the second notch position.
You
can switch your headlamps from high
to
low
beam
by pulling on the turn signalhigh beam lever.
A
circuit breaker protects your headlamps.
If
you have
an electrical overload, your headlamps will flicker on
and off. Have your headlamp wiring checked right away
if
this happens.
2-40