To
remove the shade
from
the vehicle, first let the shade
go
all the way into the holder. Then, push the shade
holder toward the passenger side
of the vehicle. Lift the
shade up
on
the driver’s side, swing the shade rearward
and take
it
out of the vehicle.
I
To
put the shade in the vehicle, first make sure the shade
slot in the holder faces rearward with the round surface
facing down. Then, hold the shade at an angle and place
the shade holder tab into the slot in the passenger’s side
trim panel. Move the other end of the shade forward and
hold
it
next to the driver’s side trim panel slot.
Push the shade holder toward the passenger’s side of the
vehicle
and
place the tab in the driver’s side trim panel
slot. Make sure the tab
goes
all the way in the slot.
Lightly pull
on
the shade holder to make sure it
is
secure.
Then,
pull the shade to the desired position and secure the
shade posts
in the appropriate retaining sockets.
Cargo
Tie
Downs
There are cargo tie downs in the rear cargo area that
allow
you
to strap cargo in and keep it from moving
inside the vehicle.
When not using the tie downs, flip them down out of
the
way.
2-56
To Next Page
Loading...
