Adjusting the Speakers
BAL:
Press lightly on this knob to release it from its
stored position. Turn the control clockwise
to
adjust
sound
to
the
right speakers and counterclockwise to
adjust sound to the left speakers. The middle position
balances the sound between the speakers.
FADE:
Press lightly on this knob to release it from its
stored position. Turn the control clockwise to adjust the
sound to the front speakers and counterclockwise for
rear speakers. The middle position balances the sound
between
the
speakers.
Push these knobs back
into
their stored positions when
you’re not using them.
Playing a Compact Disc
PWR:
Press this knob
to
turn the system on. (Please note
that you can also turn the system
on
when you insert a
compact disc into the player with the ignition
on.)
Insert a disc partway into the slot, label side up. The
player will pull it in. Wait
a
few seconds and the disc
should play.
CD
and a
CD
symbol will also appear on
the display. Anytime you are playing a
CD,
the letters
CD
will be next
to
the CD symbol.
If
the disc comes back out and ERR appears on the
display,
it
could be
that:
You are driving on
a
very rough road. (The disc
should play when the road gets smoother.)
0
The disc is upside down.
0
It
is dirty, scratched
or
wet.
It
is very humid.
(If
so,
wait about an hour and
try again
.)
0
The disc player is very hot.
Press RECALL to make ERR
go
off the display.
PREV
(1):
Press PREV or the
SEEK
left arrow to
search for the previous selection.
If
you hold this button
or press
it
more than once, the disc
will
advance further.
Sound is muted
in
this mode.
RDM
(2):
Press this button to play the tracks on the disc
in
random order. While
in
the
RDM
mode, RANDOM
appears on the display. Press
RDM
again to return to
normal play.
NEXT
(3):
Press NEXT or the SEEK right arrow
to
search for the next selection.
If
you hold this button or
press
it
more than once, the disc
will
advance further.
The next track number will appear on the display. Sound
is
muted
in
this mode.
3-22
To Next Page
Loading...
