GMC 1997 Suburban - Folding the Rear Seat (4-Door Utility)

After returning the seat to the passenger position, pull
forward
on the seatback to make sure it is locked into
place. Also, return
the safety belts and head restraints to
their original positions,
so they will be available for rear
seat passengers to use.
Folding the Rear Seat (4-DOOr Utility Model)
If
your vehicle has a 60/40 rear seat, either side may be
folded down to give
you more cargo space.
Before folding, place the latch portion of the center
safety belt in the center armrest. That way, the center
safety belt will be out of
the way when the seat is folded
and also will be easily available for passengers to use
when the seat is returned to the passenger position. Also,
make sure
that nothing is under or in front of the seat.
When the seat is folded, it will lay flat on the floor.
Set the head restraints aside
When folding the seat,
first remove the head
restraints. Push the release
buttons at the bottom of
each head restraint height
adjust post and slide
the
head restraint out of the
height-adjust tubes.
for now. You will stow them
in their proper position after you are done folding the seat.
1-10