Move the seatback release
lever, at the right rear
of
the
seat, toward the center
of
the vehicle.
Then,
fold
the seatback forward into
the.
seat cushion.
To
unlatch the seat from the
floor, pull up on
the
center
release handle at the rear
of
the seat and lift the rear seat
up,
off
of
the floor.
Replacing
the
Rear Seat
To
put
the seat back
in,
hold the seat sideways and put
it
into the vehicle. Turn the seat to the forward position
and set it down, with the latches at the bottom of
the
seat
over the hooks
in
the floor.
Pull
up
on the center release
handle and let the seat drop into place. Release
the
handle to
let
the
seat latch close and make sure it locks
into place. Then, move the seatback release lever at the
right rear
of the seat toward
the
center
of
the vehicle and
raise the seatback.
After returning the seatback to the upright position, push
the seatback forward to make sure it is locked into place.
Then, return the outside passenger position safety belts
to the seat frame buckles,
so
they will be available for
rear seat passengers to
use.
Turn the seat sideways and take
it
out
of the vehicle.
1-16
To Next Page
Loading...
