6.
7.
Start the engine and let
it
run until
you
can feel the
upper radiator hose getting hot. Watch out for
the
engine fan(s).
By this
time,
the coolant level inside the radiator
filler neck may be lower. If the level is lower, add
more
of
the proper
DEX-COOL
TM
coolant mixture
through the filler neck until the level reaches the
base of
the
filler neck.
8.
Then replace the pressure cap. At any time during
this procedure
if
coolant begins to flow out
of
the
filler neck, reinstall the pressure cap. Be sure the
arrows
on
the pressure cap line up like this.
5-20
To Next Page
Loading...
