3.
Squeeze
the
tab on the
side
of
the lamp socket
while turning the socket
to the left.
4.
Pull the socket out of the
lamp
assembly.
5.
Push
in
gently on the bulb, turn
it
to
the
left
and
remove
it
from
the socket.
6.
Put the new bulb into the socket, gently press
in
on
the bulb
and
turn
it to the right
until
it
is tight.
7.
Put the socket back into the lamp assembly and turn
it
to
the
right until
it
locks.
8.
Put the parkinghrn signal lamp assembly back into
the vehicle and tighten the screws.
Front Parking/Turn Signal Lamps with
Composite Headlamps
I.
Remove the screws
and
take out the parkinghrn
signal lamp assembly.
2.
Squeeze the tab
on
the side
of
the lamp socket while
turning the socket to the left.
6-40
To Next Page
Loading...
