Using Cruise Control
on
Hills
How
well
your cruise control will work on hills depends
upon your speed, load and the steepness
of
the hills.
When going up steep hills,
you
may want to step
on
the
accelerator pedal to maintain your speed. When going
downhill, you may have to brake or shift to a lower gear
to keep your speed down.
Of
course, applying the brake
takes you out of cruise control. Many drivers find this to
be too much trouble and don’t use cruise control on
steep hills.
Ending Cruise Control
There are two ways to turn
off
the cruise control:
0
Step lightly
on
the brake pedal or push the clutch
pedal,
if
you have a manual transmission.
0
Move the cruise switch to
OFF.
Erasing Speed Memory
When you
turn
off
the cruise control
or
the ignition,
your cruise control set speed memory
is
erased.
Exterior
Lamps
0
Your parking lamp and headlamp switch is
on
the
driver’s side
of
your instrument panel.
Rotate the knob to the right to the parking lamps symbol
to manually turn on:
0
Parking Lamps
Sidemarker Lamps
0
Taillamps
0
License Plate Lamps
Instrument Panel Lights
2-40
To Next Page
Loading...
