+e
+@
BI-LEVEL
A/C:
This setting cools the air
entering your vehicle and directs
it
through the heater
floor outlets as well as the instrument panel outlets.
fl
VENT
This setting directs most
of
the air through
the instrument panel outlets and
a
small amount through
the floor outlets. The air conditioning compressor is not
working when VENT is selected.
+’
HEATER:
This setting directs
most
of
the
warmed air through the heater floor outlets and some air
through the windshield defroster outlets.
+’
BLEND:
Airflow
is
divided equally between the
heater floor outlet and the windshield defroster outlets.
DEFROST
This setting directs most air through
+e
e
we
the windshield defroster outlets and some through the
heater
(floor)
outlets.
Electronic Climate Control System
(If
Equipped)
IA
Fan
Control
The knob
on
the left side
of
the
electronic climate control
panel controls the fan speed. To manually increase airflow,
move the knob to the right.
To
manually decrease airflow,
move
it
to
the
left.
OFF:
If the knob is in
OFF,
outside air
will
still enter
the vehicle, and
will
be directed based
on
the position
of
the mode knob.
AUTO:
If
the knob is
in
AUTO,
the fan speed
will
vary
as
the system maintains the selected temperature.
3-3
To Next Page
Loading...
