One-Piece Composite Headlamp System
1, Open the hood.
.
2.
Remove the black retainer clips by lifting up.
3.
Pull the headlamp assembly
out.
4.
Unplug the electrical connector.
5.
Turn the bulb assembly to the left to remove it.
6.
Put the new bulb assembly into the headlamp
assembly and turn it to the right until it
is
tight.
7.
Plug
in
the electrical connector.
8.
Put the headlamp lens assembly back into the
vehicle. Install the two retaining clips.
6-34
To Next Page
Loading...
