5.
Be sure that the notches are locked by the bottom
claws. Make sure that all other claws are properly
locked
on
both
sides
of the insert
slots.
lA
6.
Put the blade assembly pivot in the wiper arm
hook. Pull up until the pivot locking tab locks
in
the
hook
slot.
7.
Carefully lower the wiper arm and blade assembly
onto the windshield.
Backglass Wiper Blade Replacement
See “Windshield Wiper Blade Replacement”
in
this
section
for
instructions on
how
to change
the
backglass
wiper blade. The backglass wiper blade will not lock
in
a
vertical position like the windshield wiper blade,
so
care should be used when pulling it away from
the vehicle.
B
C
A.
Claw
in Notch
B.
Correct Installation
C.
Incorrect Installation
Tires
Your new vehicle comes with hign-quality tires made by
a leading tire manufacturer.
If
you ever have questions
about
your
tire warranty and where to obtain service, see
your
GM
Warranty booklet for details.
6-40
To Next Page
Loading...
