4.
If
you
are
replacing the center seat, connect
the
right
lap-shoulder belt to the attachment on the seat
cushion.
If
you
have
a
safety
belt
guide
on
your
seat,
pull the belt through the guide before reattaching the
lap-shoulder belt to the side of the seat. The release
hole should be facing outward.
If
you installed the safety belt
with
the release hole
facing inward (toward the seat), slide the plastic
cover up
so
you can see
the
buckle. Disconnect the
seat belt. Slide the cover back down and reinstall the
belt correctly.
NOTICE:
Be sure to put the correct seats back in the
proper positions
so
the safety belts will
work properly,
Safety Belts: They’re for
Everyone
This
part
of
the
manual
tells
you
how to use safety belts
properly. It also tells you some things you should not do
with
safety belts.
And it explains the Supplemental Inflatable Restraint
(SIR),
or
air
bag system.
142
..
To Next Page
Loading...
