Shifting to
Neutral
To
shift
the
transfer case to neutral, f'irst make sure the
vehicle is parked
so
that
it
will
not roll:
1.
Set the parking brake.
2.
Start the vehicle.
3.
Connect the vehicle
to
the towing vehicle.
4. Put the transmission
in
NEUTRAL
(N).
5.
Shift the transfer case to 2HI.
6.
Simultaneously press and hold the 2H1
and
4L0
buttons for
10
seconds. The red NEUTRAL
light
will come on when the transfer case
shift
to
neutral
is complete.
7.
Shift the transmission to REVERSE
(R)
for
one second, then shift the transmission
to
AUTOMATIC
OVERDRIVE
@)
for
one
second.
8.
Turn
the
ignition to
OFF.
9.
Place the transmission shift lever
in
PARK (P).
Shifting
Out
of
Neutral
To
shift out of neutral:
1.
Set the. parking brake and apply thc regular
brake
pedal.
2.
Start the vehicle with the transmission
in
PARK
(P).
3.
Press the button
for
the desired transfer
case
shift
position (2HI. 4H1,
AUTO
4WD
or
4LO).
4. Put
the
transmission
in
NEUTRAL (N).
5.
Shift the transmission lever to the desired position.
After the transfer case has shifted out of NEUTRAL,
the red light
will
go
out.
Parking Brake
To
set the parking brake, hold the regular brake pedal
down
with
your right foot. Push down the parking brake
pedal
with
your left foot.
If
the ignition
is
on,
the brake system warning light will
COlnC
on.
10.
Release
the
parking brake prior to towing.
2-24
To Next Page
Loading...
