To
remove the air filter, unhook the retainer clips and
remove the cover. Lift
the
filter and the connected duct
out of the air cleaner housing. Hold the duct and remove
the
filter
by both pulling and twisting
the
filter away
from the duct. Care
should
be taken to dislodge as little
dirt
as
possible.
Clean the filter sealing surface
of
the duct and the
filter housing.
Install the new filter
by
pushing
it
all the way
to
the stop
on the duct.
Install the duct and the filter into the
air
cleaner housing.
Make sure that the duct fits properly into the housing.
Install the cover
and
fasten the two retaining clips.
After the air filter
is
properly serviced, the indicator
should be reset. Push the button on top of the indicator
to
reset
it
to
the green (clean) filter zone.
6-19
To Next Page
Loading...
