Cleaning Interior Plastic Components
Use only
a
mild soap and water solution
on
a
soft
cloth or sponge. Commercial cleaners may affect the
surface finish.
Care
of
Safety Belts
Keep belts clean and dry.
I
Do
not bleach or dye safety belts.
If
you do, it
may severely weaken them. In a crash, they
might not be able to provide adequate protection.
Clean safety belts only with mild soap and
lukewarm water.
Cleaning Glass Surfaces
Glass
should be cleaned often.
GM
Glass
Cleaner
(GM
Part
No.
1050427)
or
a
liquid household
glass
cleaner
will remove normal tobacco smoke and dust films on
interior glass.
Don't use abrasive cleaners
on
glass, because they may
cause scratches. Avoid placing decals
on
the
inside rear
window, since they may have
to be scraped off later.
If
abrasive cleaners are used on the inside of the rear
window.
an
electric defogger element may be damaged.
Any
temporary license should not be attached across the
defogger grid.
6-55
To Next Page
Loading...
