2-84
Annual Mileage
D
The annual mileage displayed is the mileage
accumulated since the annual mileage was reset.
D
Pressing the RESET button will reset the annual
mileage to 0.
D
Pressing the arrow button will display the ratio of
personal trip computer mileage to annual mileage as
a percent.
D
Pressing the arrow button again will display the ratio
of business trip computer mileage to annual mileage
as a percent.
Menu
Press the MENU button to choose a feature you
would like to personalize (the features are listed below).
Each press of the button will display a new item that can
be personalized. Use the arrow button to choose the
setting you would like to use within the chosen feature.
For example, you would prefer to personalize the
automatic door locks so that the automatic locking
feature is disabled. You would do the following:
1. First press the MENU button until you reach the
Automatic Door Lock screen.
2. Next, press the arrow button until you find the
Disabled setting.
3. The setting is now actually set without having to
do anything else. You can do one of three things at
this point:
D
You can leave the personalization mode by
pressing FUEL or TRIP.
D
You can just let the SIC exit the personalization
mode on its own by waiting approximately
15 seconds without touching any buttons.
The SIC will then display the day/date.
D
Or you can press the MENU key to move on to
the next programmable feature.
To Next Page
Loading...
