5-24
Removing the Flat Tire and Installing
the Spare Tire
1. Use the wheel wrench to
loosen all the wheel nuts.
Turn the wheel wrench
counterclockwise to
loosen the wheel nuts.
Don’t remove them yet.
2. Position the jack under the vehicle. If the flat tire is
on the front of the vehicle, position the jack on the
frame behind the flat tire.
If the flat tire is on the rear, position the jack under
the rear axle between the spring anchor and the
shock absorber bracket.
CAUTION:
Getting under a vehicle when it is jacked up is
dangerous. If the vehicle slips off the jack, you
could be badly injured or killed. Never get under
a vehicle when it is supported only by a jack.
To Next Page
Loading...
