1-12
50/50 Split Bench Seat (Third Row)
If your vehicle has a 50/50 split bench, the seatback(s)
can be folded and the entire seat(s) tilted or removed
from the vehicle.
Folding the Bench Seats
To fold the seatbacks, do the following:
1. Pull up on the release
lever, labeled “1”,
located on the rear of the
seatback, and push the
seatback forward.
2. To return the seat to the
passenger position, pull
up on the release lever
labeled 1 and then pull
up on the seatback or the
assist strap located on
the outboard side of
the seat until the
seatback locks into the
upright position.
Push forward on the seatback to make sure it
is locked into position.
To Next Page
Loading...
