2-43
Exterior Lamps
Your parking lamp and headlamp switch is located on
the driver’s side of your instrument panel.
Turn the knob clockwise to the parking lamps symbol to
manually turn on:
D
Parking Lamps
D
Sidemarker Lamps
D
Taillamps
D
License Plate Lamps
D
Instrument Panel Lights
D
Roof Marker Lamps (If Equipped)
Turn the knob clockwise to the master lamps symbol to
turn on all the lamps listed as well as the headlamps.
Turn the knob all the way counterclockwise to turn
off your lamps and put the system into automatic
headlamp mode.
Turn the thumbwheel next to the knob up to adjust
instrument panel lights. Turn the thumbwheel up to
return the radio and gearshift indicator LED display to
full intensity when the headlamps or parking lamps
are on. To turn on the dome lamps, with the vehicle
doors closed, turn the thumbwheel up to the second
notch position.
You can switch your headlamps from high to low
-beam
by pulling on the turn signal/high
-beam lever.
A circuit breaker protects your headlamps. If you have
an electrical overload, your headlamps will flicker on
and off. Have your headlamp wiring checked right away
if this happens.
To Next Page
Loading...
