HomeLink@ Transmitter
HomeLink@ , a combined universal transmitter and
receiver, provides a way
to
replace up
to
three
hand-held transmitters used
to
activate devices such as
gate operators, garage door openers, entry door
locks, security systems and home lighting. Additional
HomeLink@ information can be found on the internet at
www.homelink.com or by calling 1-800-355-351
5.
If your vehicle is equipped with the HomeLink@
Transmitter, it complies with Part
15
of the FCC Rules.
Operation is subject
to
the following two conditions:
(1)
this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
This device complies with RSS-210 of Industry Canada.
Operation is subject
to
the following
two
conditions:
(1)
this device may not cause interference, and (2) this
device must accept any interference received,
including interference that may cause undesired
operation of the device.
Changes and modifications
to
this system by other than
an authorized service facility could void authorization
to
use this equipment.
Programming the HomeLink@
Transmitter
Do
not use the HomeLink@ Transmitter with any garage
door opener that does not have the “stop and reverse”
feature. This includes any garage door opener model
manufactured before April
1,
1982.
Keep the original transmitter for use in other vehicles as
well as for future HomeLink@ programming.
It
is also
recommended that upon the sale of the vehicle,
the programmed HomeLink@ buttons should be erased
for security purposes. Refer
to
“Erasing HomeLink@
Buttons’’ or, for assistance, contact HomeLink@ on the
internet at: www.homelink.com or by calling
1-800-355-351
5.
2-42
To Next Page
Loading...
