Turn SignaVMultifunction
Lever
Turn and Lane Change Signals
The lever on the left side of the steering column
includes the following:
00
:
Turn and Lane Change Signals
0
go
:
Headlamp High/Low-Beam Changer
Flash-to-Pass Feature
9s
:
Windshield Wipers
0
6
:
Windshield Washer
:
Cruise Control (If Equipped)
To signal a lane change, just raise or lower the lever until
the arrow starts
to
flash. Hold
it
there until you complete
your lane change. The lever will return by itself when you
release it. The bottom of the outside rearview mirrors may
also be equipped with lane change indicators.
As
you signal a turn or a lane change,
if
the arrows flash
more quickly than normal, a signal bulb may be burned
out and other drivers won’t see your turn signal.
3-7
To Next Page
Loading...
