DlSP (Display): Press this knob to change what
appears on the display while using RDS. The display
options are station name, RDS station frequency,
PTY and the name of the program
(if
available).
To change the default on the display, push the knob
until you see the display you want, then hold the knob
for two seconds. The radio will produce one beep
and selected display will now be the default.
Finding a
PTY
Station
To select and find a desired PTY perform the following:
1.
Press the P-TYPE LIST knob. TYPE and a PTY
2.
Select a category by turning the P-TYPE
will appear on the display.
LIST knob.
3.
Once the desired category is displayed, press the
SEEK TYPE button to take you to the category’s
first station.
4. If you want
to
go
to
another station within that
category and the category is displayed, press
the SEEK TYPE button once. If the category is not
displayed, press the SEEK TYPE button twice
to display the category and then to go to another
station.
If
the radio cannot find the desired program type, NONE
will appear on the display and the radio will return to
the last station you were listening to.
AM FM (Alternate Frequency): Alternate frequency
allows the radio to switch
to
a stronger station with the
same program type. Press and hold AM
FM for two
seconds to turn alternate frequency on. AF ON will
appear on the display. The radio may switch
to
stronger
stations. Press and hold AM FM again for two seconds
to
turn alternate frequency
off.
AF OFF will appear on the
display. The radio will not switch to other stations. When
you turn the ignition
off
and then on again, the alternate
frequency feature will automatically be turned on.
RDS
Messages
ALERT!: Alert warns of local or national emergencies.
When an alert announcement comes on the current
radio station, ALERT! will appear on the display. You will
hear the announcement, even
if
the volume is muted
or
a cassette tape or compact disc is playing. If the
cassette tape or compact disc player is playing, play will
stop during the announcement. You will not be able
to
turn
off
alert announcements.
ALERT! will not be affected by tests of the emergency
broadcast system. This feature is not supported by
all RDS stations.
3-75
To Next Page
Loading...
