Lap-Shoulder
Belt
All
rear seating positions have lap-shoulder belts. Here’s
how to wear one properly.
When the shoulder belt is pulled out all the way,
it will lock.
If
it does, let it go back all the way and
start again.
If the belt is not long enough, see
Safety Belt Extender on page
7-29.
1.
Pick up the latch plate and pull the belt across you.
2.
Push the latch plate into the buckle until it clicks.
Don’t let it get twisted.
Pull up on the latch plate to make sure it is secure.
3.
To make the lap part tight, pull up
on
the
shoulder part.
1-24
To Next Page
Loading...
