Bulb
Replacement
For the type of bulbs, see Replacement Bulbs
on
page
5-52.
For any bulb changing procedure not listed in this
section, contact your dealer.
Halogen Bulbs
6.
Remove the headlamp bulb by turning the socket
7.
To
install the replacement bulb, reverse Steps
1
counterclockwise.
through
6.
Front Turn Signal anc
Lamps
3
Sidemarker
Follow the same procedure listed for headlamp removal
earlier in this section. Replace the turn signal or
sidemarker bulb instead.
I
Halogen bulbs ha pressurized gas inside and
I
Taillamps and Turn Signal Lamps
can burst if you drop or scratch the bulb. You
or
others could be injured. Be sure to read and
follow
the instructions on the bulb package.
Headlamps
1.
Open the hood.
2. Lift the inner quick release clips.
3.
Pull the headlamp assembly away from the vehicle.
4.
Remove the cover from the headlamp bulb.
5. Disconnect the wiring harness.
1.
Open the Iiftgate.
2.
Remove the two
screws from the lamp
assembly.
5-51
To Next Page
Loading...
