2.
Turn the wheel wrench counterclockwise
to
lower
the spare tire. Keep turning the wheel wrench until
the spare tire can be pulled
out from under the
vehicle.
If the spare tire does not lower
to
the ground,
the secondary latch is engaged causing the tire not
to
lower. See 44Secondary Latch System” later in
this section.
When the tire has been completely lowered, tilt the
retainer at the end
of the cable and pull it through
the wheel opening. Pull the tire out from under
the vehicle.
Notice:
To
help avoid vehicle damage, do not drive
the vehicle before the cable is restored.
3.
Put the spare tire near the flat tire.
4.
Use the chisel end of the wheel wrench
to
pry off
the center cap.
See “Removing the Flat Tire and Installing the
Spare Tire” later in this section
to
continue changing
the flat tire.
5-70
To Next Page
Loading...
