With this system, use the
LATCH
system instead of the
vehicle’s safety
belts
to
secure a child restraint.
See Securing a Child Restraint
in
a Rear Outside Seat
Position
on
page
1-44.
If a
-.4TC
~ --type child restraint
isn’t
attached to
its
anchorage points, the restraint won’t be
able to protect the child correctly.
In
a crash,
the child could be seriously injured or killed.
Make sure that a LATCH-type child restraint is
properly installed using the anchorage points,
or use the vehicle’s safety belts to secure the
restraint. See “Securing a Child Restraint
Designed for the LATCH System” or “Securing
a Child Restraint in a Rear Outside Seat
Position”
in
the Index for information on how
to secure a child restraint in your vehicle.
1-43
To Next Page
Loading...
