Getting to Know Your Yukon/Yukon Denali
14
Odometer/Trip Settings
(if equipped)
Your vehicle’s personal trip and busi-
ness trip odometers operate only when
they are turned on. The controls are
located on the steering wheel.
Enable the system
• Press the Trip button ( ) until the
words “Personal Trip” appear. Then
press ( ) to denote Personal Trip
ON. Press the Trip button again to
monitor your mileage. (Note:
Continue to press the Trip button to
monitor the features shown in the
next column.)
Use the above procedure to monitor the
following settings:
• Personal/Business: Miles
• Personal/Business: Gal.
• Personal/Business: Avg. MPG
• Personal/Business: MPH
• Personal/Business: Annual % Usage
• Business: Hourmeter (Total Engine
Run Time)
• Business: Annual Log
• Business: Timer
Reset trip information
• Press and hold the Select button
( ) for two seconds while viewing
any of the trip modes on the Driver
Information Center.
See Section 2 of your Owner Manual.
Note: Whether your vehicle is equipped
with a Driver Information Center or not,
you can select and reset trip features by
using the Trip Odometer Reset Stem
located on the instrument panel cluster.
To Next Page
Loading...
