EasyManua.ls Logo

GMC 2004 YUKON DENALI - Interior Mirror and Climate Control; Automatic Dimming Rearview Mirror; Automatic Climate Control

GMC 2004 YUKON DENALI
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Automatic Dimming Rearview
Mirror with OnStar
®
, Compass
and Temperature Display
(if equipped)
Controls for the dimming feature, as well
as OnStar
®
(if equipped) and the com-
pass and temperature displays, are
located on the bottom of the mirror.
When on, the automatic interior dimming
rearview mirror automatically dims to the
proper level to minimize glare from lights
behind you when it’s dark outside.
Turn the self-dimming function on
or off
Press and hold for approximately
eight seconds.
Use the OnStar Communications
system
Press to connect to an OnStar
®
Advisor.
Press to answer or end a call
from the OnStar
®
Center.
Press in an emergency to connect
to an OnStar
®
Advisor who can con-
tact the nearest emergency services
provider.
Turn the outside temperature dis-
plays and compass readings on or off
Press .
Display temperature
Press and hold for four seconds
(until the display blinks) to toggle
between °C and °F. Once the desired
°C or °F is displayed, release the
button. Wait 4 seconds and the
temperature will be displayed.
See Section 2 of your Owner Manual.
Automatic Climate Control
System (if equipped)
In addition to its automatic temperature
control feature, this climate control sys-
tem allows the driver and front passen-
ger to choose their own temperature
settings.
Adjust settings for automatic
operation
Push the AUTO button (“A” above)
and adjust the temperature knob (“B”
above) to the desired temperature.
When automatic operation is active, the
system will control the inside tempera-
ture, air delivery, and fan speed.
Set same temperature for driver and
front passenger
Press and hold the AUTO button for
four seconds.
Press and hold the AUTO button again
for four seconds to return to individual
driver/front passenger controls.
Select air distribution manually
Press and release the MODE button
(“C” above) until the desired source
of air is indicated on the display.
The MODE feature allows you to select
air delivery to the floor, the instrument
panel outlets, or the windshield outlets.
Manually raise or lower fan speed
Press the upper or lower portion of
the FAN control button (“D” above).
See Section 3 of your Owner Manual.
A
B
C
D

Related product manuals