Audio Steering Wheel Controls
Some audio controls can be adjusted at the steering
wheel. They include the following:
g (OnStar/Voice Recognition): If your vehicle has
OnStar
®
, press this button to interact with the OnStar
®
system. See the OnStar
®
manual provided with your
vehicle for more information.
If your vehicle does not have OnStar
®
, press this button
to silence the system. Press it again, or any other
radio button, to turn on the sound.
PROG (Program): Press this button to play a station
you have programmed on the radio preset pushbuttons.
The radio will only seek preset stations with a strong
signal that are in the selected band.
When a cassette tape is playing, press this button to
play the other side of the tape.
When a CD is playing in the CD changer, press this
button to go to the next available CD, if multiple CDs
are loaded.
Q SOURCE R: Press this button to switch between
FM1, FM2, AM, or XM1 or XM2 (if equipped), or a
cassette tape or CD. The cassette or CD must be loaded
to play. Available loaded sources are shown on the
display as a tape or a CD symbol.
Q SEEK R: Press the up or the down arrow to go to
the next or to the previous radio station and stay
there. The radio will only seek stations with a strong
signal that are in the selected band.
When a cassette tape or CD is playing, press the up or
the down arrow to fast forward or reverse.
Q VOLR (Volume): Press the up or the down arrow
to increase or to decrease the volume.
3-137
To Next Page
Loading...
