EasyManua.ls Logo

GMC 2005 Canyon - Rear Door Security Locks (Crew Cab Models); Headlamp Controls

GMC 2005 Canyon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Rear Door Security Locks
(Crew Cab models)
Crew Cab models are equipped with
rear door security locks that allow you to
lock the rear doors so they cannot be
opened by passengers from the inside.
The lock switch (shown above) is locat-
ed on the inside edge of each rear door.
Engage the rear door security locks
Open a rear door and insert your
ignition key into the lock.
On the driver’s side rear door, turn
the key clockwise to engage the rear
door security lock (turn it counter-
clockwise on the opposite side rear
door).
Close the door.
Open the rear door when the security
lock is on
Unlock and open the door from
outside the vehicle.
Return the rear doors to normal use
On the driver’s side rear door, insert
the key and turn the lock counter-
clockwise (turn it clockwise on the
opposite side rear door).
See Section 2 of your Owner Manual.
Headlamp Controls
The exterior lamps control is located on
the instrument panel to the left of the
steering wheel.
Turn off all exterior lamps, including
the Daytime Running Lamps
Turn the knob to the OFF position
().
Activate the automatic headlamp sys-
tem that illuminates all exterior lamps
and the instrument panel/radio lights
when they are needed
Turn the knob to the AUTO position.
Manually illuminate the parking
lamps, exterior tail/side-marker lamps
and instrument panel/radio lights
Turn the knob to this position ( ).
Activate the headlamps, exterior
tail/side-marker lamps and instrument
panel/radio lights
Turn the knob to this position ( ).
See Section 3 of your Owner Manual.

Other manuals for GMC 2005 Canyon

Related product manuals